User Guide
LumaDent Light by LumaDent
Getting Started
1. Charge the battery
Please fully charge your battery prior to use. A red light shows the battery is charging, and a green light will show once the battery is fully charged. When using the light, an orange LED on the battery pack indicates a low battery |
2. Attach light to bracket
Slide the LED unit onto the bracket and attach the wire as pictured |
3. Wire management
Use the spiral wrap or velcro provided to hold the wire against the side of the loupes frame. Run the remaining wire down your back, connect it to the battery, and place the battery in your pocket / on your belt |
4. Select light intensity
Use the adjustment dial to select light intensity, and then turn the battery pack on. A lower intensity will result in a longer battery life. |
5. Composite filter (if needed)
Attach the orange composite filter provided to prevent premature curing of resin-based dental materials |
Cleaning Instructions
The headlight is manufactured using only high-quality components. This is an optical precision instrument that must be cleaned and handled with the greatest care.
- Only use a lens cleaner on the LED unit with a microfibre cloth
- All other components can be cleaned with a disinfectant wipe
- Do not immerse any components into liquid
- Do not use an autoclave, chemiclave, glutaraldehyde, iodophor or any other sterilisation method
Safety Instructions
- Only LumaDent power supplies are to be used to power the battery
- Do not look directly into the headlight or aim the headlight directly into someone’s eyes
- The control unit and the battery must be used exclusively for the purpose described
- Under no circumstances should you open the housing of the charger or the control unit. Never take the devices apart or undertake modifications