User Guide
ProLUX LED Light by LumaDent
Getting Started
1. Charge the battery
Please fully charge your battery prior to use. A red light shows the battery is charging, and a green light will show once the battery is fully charged. When in use, the 4 indicator lights will show the remaining battery level |
2. Attach light to bracket
Slide the LED unit onto the bracket and attach the wire as pictured |
3. Wire management
Use the two elastic rings to secure the control switch and wire to the frame of your loupes. Run the remaining wire down your back and place the battery pack in your pocket |
4. Select light intensity
Tap the control switch once to turn the light on/off. Press and hold the control switch for two seconds to select one of the four brightness levels, releasing the control switch on your desired intensity level |
5. Composite filter (if needed)
Attach the orange composite filter provided to prevent premature curing of resin-based dental materials |
Cleaning Instructions
The headlight is manufactured using only high-quality components. This is an optical precision instrument that must be cleaned and handled with the greatest care.
- Only use a lens cleaner on the LED unit with a microfibre cloth
- All other components can be cleaned with a disinfectant wipe
- Do not immerse any components into liquid
- Do not use an autoclave, chemiclave, glutaraldehyde, iodophor or any other sterilisation method
Safety Instructions
- Only LumaDent power supplies are to be used to power the battery
- Do not look directly into the headlight or aim the headlight directly into someone’s eyes
- The control unit and the battery must be used exclusively for the purpose described
- Under no circumstances should you open the housing of the charger or the control unit. Never take the devices apart or undertake modifications